Tone-Empire-Firechild_icon

Tone Empire Firechild 2.0

  • Download Tone Empire Firechild 2.0 Free Full Activated

Free download Tone Empire Firechild 2.0 full version standalone offline installer for Windows PC,

Tone Empire Firechild Overview

This program includes four models of the Vari-Mu Compressor ranging from Tube Versions (A/B/C) to a transparent version accurately sampled and emulated from the originals of the 1950s.

It aims to emulate the characteristics of the King of Compressors from the 1950s. The vintage units are variable-mu-type compressors that use the vacuum tubes to reduce gain in the audio signal path (no re-routing to a compression circuit).

The limiter was required to catch any unwanted signal peaks reliably, and these fast attack times were one of the compressor's most essential features.

Features of Tone Empire Firechild

Switch toggles between the Stereo compressor mode and two mono (L-R) compressor modes
The A/B/C models are emulations of 3 tube versions of the compressor with the tube color and saturation
A "transparent "version of the compressor without the coloration created by tubes
Controls the bias of the compressor, offering additional saturation for all four models
Indicate the gain reduction for both channels (in stereo mode ) or the mono channel
Ranging from -24dB to +24 dB, the input gain will also saturate the sound of driven hard
Saturate the signal on models A/B/C with or without using the compression circuit at all
Last stage of the signal path and will trim the output signal to -24dB or add gain up to 24dB
Controls the threshold for the compressor circuit
Control the knee curve for the compressor
Balance the mix of the wet (compressed) signal & (uncompressed) signal coming from the Model/Convolution Engine
Controls the gain of the sidechain signal going into the side chain circuit of the compressor
The Low Pass filter (range 20 Hz to 20 kHz)
The High Pass filter (range 20 Hz to 20 kHz)
Toggle between on/off for the side chain circuit

System Requirements and Technical Details

Supported OS: Windows 11 / Windows 10
Processor: Multi core Intel Series or above, Xeon or AMD equivalent
RAM: 2GB (4GB or more recommended)
Free Hard Disk Space: 1GB or more recommended
Screen resolution: 1024×768 or high
VST3, AU, or AAX 64-bit host

,download Tone Empire Firechild FileCR, getintopc , Program download Tone Empire Firechild, Download Tone Empire Firechild, Download Tone Empire Firechild, Program Tone Empire Firechild, Tone Empire Firechild Full activated, crack program Tone Empire Firechild, program explanation Tone Empire Firechild

How to download and install Tone Empire Firechild

Or you can read the article dedicated to the download and installation steps: How to download softwares from PeskTop

Comments

37.82 MB
Zip password: 123
    Old versions
Program details
  • Program size
    37.82 MB
  • Version
    2.0
  • Program language
    multilanguage
  • Last updated
    Before 7 Month
  • Downloads
    160
Ad
Download link for : : Tone Empire Firechild
Contact our support team on our Facebook page to solve your problem directly go to the contact page